of 12
1/3 ” 520TVL High - Res. Color Camera EQ350HQ User ’ s Manual and Operation Instructions.
Notice This manual is presented to the users of EQ350HQ by EverFocus Electronics Corp. With years of engineering researches, EverFocus has spared no effort to provide the high quality products to the worldwide users.
T able of Contents Safety Warning ………………………………………… 1 Introduction …………………………………………… ..2 Specification ……………………………………………. 3 Major Parts and Their Fun ctions ………………… .
1 . Handle the camera with care. Be careful when handling the camera, do not drop it or subject it to strong shock or vibration to prevent any damages to it. Do not disassemble it or place it on an unstable base. 2. Do not install the camera near electric or magnetic fields.
The new EQ350HQ series is a solid - state c olor video camera specially designed for high quality surveillance applications. It incorporates break through DSP technology that provides most reliable and accurate color picture in security industry.
Pickup device: 1/3 interline transfer color CCD Video format: NTSC/PAL Picture element: NTSC: 768(H) x 494(V) PAL: 752(H) x 582(V) Horizontal resolution: 520TV lines Video output: BN C VBS 1.0Vp - p, 75ohm Sensitivity: 1.0lux/F=1.2 S/N ration: Over 48dB Electronic shutter: Up to 1/100,000 Back light comp.
Side Top Rear (EQ350HQ) Rear (EQ350HQA) Major Parts Names and Their Functions 4 1 2 3 8 5 6 7 Front Side 10 11 12(optional) 9 12(optional) 11 10 9 9.
1. Focal Length A djustment R ing Use this ring to adjust the a ppropriate focal length according to the type of lens. Rotate the ring clockwise for the CS - mount lens, rotate it counterclockwise for the C - mount lens. The factory setting is C - mount.
ES ( Electronic Shutter ) Off/On ES ON: The camera continuously adjusts the shutter speed from 1/60 (NTSC), 1/50 (PAL) second to 1/100,000 second according to the luminance conditions of the scene. ES OFF: The shutter spe ed is fixed at 1/60 (NTSC), 1/50 (PAL) second.
VD/DD ( Auto Iris lens Type ) For video drive auto iris lens, please set switch to VD. For direct drive iris lens, set switch to DD. The default setting is DD. Wire the cable of lens to lens connector according to the following table. Pin1 Pin2 Pin3 Pin4 Lens Connector Video Drive +12V GND VD - IRIS GND Direct Drive Cnt - Cnt+ Drv+ Drv - 6.
1. Remove the cover cap from the top of th e lens mount. 2. To attach a C - mount/CS - mount lens, turn the focal length adjustment ring to the appropriate position. Note: If a C - mount lens is used, please make sure the focal length adjustment ring is set at C position before fixing the lens.
EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin - Tai Wu Road, Hsi - Chi, Taipei, Taiwan TEL: +886 - 2 - 26982334 FAX: +886 - 2 - 26982380 www.everfocus.com.tw USA Office: 2445 Huntington Drive, San Marino, CA 91108, U.S.A. TEL: +1 - 626 - 844 - 8888 FAX: +1 - 626 - 844 - 8838 www.
