of 19
Quick Installation Guide Version 1.0 P0715 7" Compact Intel Low Voltage PIII / Celeron Panel PC.
2 P0715 Quick Installation Copyright © 2006 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve the reliability, design and function. It does not represent a commitment on the part of the manufacturer.
3 3 P0715 Quick Installation Warning Panel PC and their components contain very delicate Integrated Circuits (IC). To protect the Panel PC and its components against damage from static electricit y , you should always follow the following precautions when handling it : 1.
4 P0715 Quick Installation Getting Started This section will help you have your P0715 up and running smoothly. Before up and running, please make sure the package contains all of above accessories. If any of the above items is damaged or missing, contact your vendor immediately.
5 5 P0715 Quick Installation Model Name CPU Intel Low Voltage Celeron 400~733MHz CPU FSB100/133MHz Cache 2nd Level 256K Memory 1 x 144Pin SO-DIMM up to 512MB SDRAM VRAM SMI722 G8 Lynx 3D+ engine 8MB V.
6 P0715 Quick Installation Mounting Hook Mounting Arm Mounting.
7 7 P0715 Quick Installation Dimension Unit: mm.
8 P0715 Quick Installation OSD of Front Panel.
9 9 P0715 Quick Installation Location of I/O Ports Before starting to install software on your new Panel PC please spend some time to find out the exact location of connectors and HDD (if pre-installed). The front panel does not contain any indicators, switches, connectors or drive a ccess.
10 P0715 Quick Installation Connecting Peripherals The user can use the I/O interfaces located at the backside of the chassis to connect external peripheral devices, such as a mouse, a keyboard, a monitor, serial devices or parallel printer etc. Before connection, make sure that the computer and the peripheral devices are turned off.
11 11 P0715 Quick Installation USB Ports P0715 provides four external USB ports to connect to external USB devices. USB ports and devices are hotplug capable. Therefore any USB device can be connected at all time without the need to power down your system.
12 P0715 Quick Installation Hardware Installation HDD installation 1. On the back of P0715, locate the screws that secure the rear case. Use screw driver to remove the screws. Keep the screws safely for later use. Pull the baffle slightly upward the main unit until it is disen- gaged from main unit.
13 13 P0715 Quick Installation 44 pin IDE Cable 2.5" HDD Pin 1 Note: Beware of the directions when wiring HDD and IDE cable. Pin 1.
14 P0715 Quick Installation Panel PC Installation 1. In 2.4B or above Driver, choose Drivers & Utili- ties..
15 15 P0715 Quick Installation 1.1 Select Panel Computing ..
16 P0715 Quick Installation 1.2 Select P0715 ..
17 17 P0715 Quick Installation 1.3 Install All Drivers..
18 P0715 Quick Installation 2. Install T ouch Screen Driver..
19 19 P0715 Quick Installation 4. Select Promote Touch Driver to install..