of 110
USER’S MANUAL PPC-75 0 8 F Intel® Celeron M 8.4” Panel PC System PPC-7508F M1.
Copyright Notice PPC-7508F Panel PC System With LCD / Touch screen OPERATION MANUAL COPYRIGHT NOTICE This operation manual is meant to assist users in installing and settin g up the system. The inform ation contained in this docum ent is subject to change without prior any not ice.
Copyright Notice FCC NOTICE This equipment has been tested and found to comply wi th the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference when the equipment is operated i n a commercia l environment.
Contents TABLE OF CONTENTS CHAPTER 1 INTRODUCTION 1-1 About This Manual ....................................................... 1-2 1-2 Case Illustration ............................................................. 1-3 1-3 System Specification ......
Contents 2-31 Inverter Connector …………………………………… 2-31 2-32 Power Module ………………………………..………. 2-32 2-33 Compact Flash Connector …………………………….. 2-33 2-34 PC 104+ Connector …………………………………….
Contents APPENDIX A SYSTEM ASSEMBLY Exploded Diagram for CF Card Hook ………..……………… A-2 Exploded Diagram for Fanl ess Back Cover ….……………..… A-3 Exploded Diagram for Sy stem Power Assembly ….……..…. A-4 Exploded Diagram for I/ O Port Assem bly ………………….
Page:1-1 INTRODUCTION This chapter gives you t he information for PPC-7508F. It also outlines the System specifications. Section includes: z About This Manual z Case Illustration z System Specifications z Safety precautions Experienced users can skip to chapter 2 on page 2-1 for a Quick Start.
Chapter 1 Introduction Page: 1-2 PPC-7508F USER ′ S MANUAL 1-1. ABOUT THIS MANUAL Thank you for purchasing our Panel PC. It is an updated system designed to be comparable with t he highest performance of IBM AT personal computers. It provides faster processing speed, greater exp andability, and can hand le more tasks.
Chapter 1 Introduction PPC-7508F USER ′ S MANUAL Page: 1-3 1-2. CASE ILLUSTRATION.
Chapter 1 Introduction Page: 1-4 PPC-7508F USER ′ S MANUAL 1-3. SYSTEM SPECIFICATIONS MAINBOARD (PROX-7500) z CPU TYPE: Intel Celeron-M ULV 1.0GHz on board (non L2 cache) Auto detect voltage regulat or.
Chapter 1 Introduction PPC-7508F USER ′ S MANUAL Page: 1-5 z DISPLAY : LCD Panel 8.4”: 800*600 SVGA z WATCHDOG : Selectable for NMI or Reset function. z IDE INTERFACE : 1. One IDE port support up to two IDE device 2. Support Ultra DMA 33/ 66/100 3.
Chapter 1 Introduction Page: 1-6 PPC-7508F USER ′ S MANUAL z HARDWARE MONITORING FUNCTION : Monitor CPU Voltage, CPU Temperature. z LED INDICATOR : Power LED. HDD LED. LCD PANEL TFT color LCD is m anufactured by using very high brightness technology .
Chapter 1 Introduction PPC-7508F USER ′ S MANUAL Page: 1-7 According to the supplier’s LCD specification. z BACKLIGHT MTBF : According to the supplier’s LCD specification. z DIMENSION : According to the supplier’s LCD specification. TOUCH SCREEN : ELO 8.
Chapter 1 Introduction Page: 1-8 PPC-7508F USER ′ S MANUAL 1-4. SAFETY AND NOTIFICATION Following m essages are safety reminders on how to protect your systems from damages. And thus, helps you l engthen the life cycle of the system . 1. Check the Line Voltage a.
Page 2-1 SYSTEM CONFIGURATION Helpful information that describes the j u mper & connector settings, and component locati ons. Section includes: z Jumper & Connector Quick R eference Table z Co.
Chapter 2 Hardware Config uration Page: 2-2 PPC-7508F USER ’ S MANUAL 2-1. JUMPER & CONNECTOR QUICK REFERENCE TABLE COM1 RI & Voltage Selection …………..………….... JP6 COM2 RI & Voltage Selection ………………………… JP7 COM3 RI & Voltage Selection ……………………….
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-3 2-2. COMPONENT LOCATIONS PPC-7508F Connector, Jumper and Component locations.
Chapter 2 Hardware Config uration Page: 2-4 PPC-7508F USER ’ S MANUAL 2-3. HOW TO SET THE JUMPERS You can configure your board by setti ng the jumpers.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-5 JUMPER DIAGRAMS JUMPER SETTINGS.
Chapter 2 Hardware Config uration Page: 2-6 PPC-7508F USER ’ S MANUAL PPC-7508F Jumper Illustration.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-7 2-4. COM 1 RI & VOLTAGE SELECTION JP6 : COM1 RI & Voltage Selection The selections are as follows: SELECTION JUMPER SETT.
Chapter 2 Hardware Config uration Page: 2-8 PPC-7508F USER ’ S MANUAL 2-5. COM 2 RI & VOLTAGE SELECTION JP7 : COM2 RI & Voltage Selection The selections are as follows: SELECTION JUMPER SETT.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-9 2-6. COM 3 RI & VOLTAGE SELECTION JP9 : COM3 RI & Voltage Selection The selections are as follows: SELECTION JUMPER SETT.
Chapter 2 Hardware Config uration Page: 2-10 PPC-7508F USER ’ S MANUAL 2-7. COM 4 RI & VOLTAGE SELECTION JP8 : COM4 RI & Voltage Selection The selections are as follows: SELECTION JUMPER SET.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-11 2-8. RS232/422/485 (COM2) SELECTION JP13 : RS-232/422/485 (COM 2) Selection COM2 is selectabl e for RS-232, 422, 485 function.
Chapter 2 Hardware Config uration Page: 2-12 PPC-7508F USER ’ S MANUAL 2-9. BRIGHTNESS VOLTAGE SELECTION JP1 : Brightness Voltage Sel ection The selections are as follows : SELECTION JUMPER SETTING (Pin Closed) JUMPER ILLUSTRATION 5V (default) 2-3 2.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-13 2-10. LVDS VOLTAGE SELECTION JP12 : LVDS Voltage Selection The selections are as follows : SELECTION JUMPER SETTING (Pin Closed) JUMPER ILLUSTRATION VCC 3.
Chapter 2 Hardware Config uration Page: 2-14 PPC-7508F USER ’ S MANUAL 2-11. LVDS PANEL RESOLUTION SELECTION JP10 : LVDS Panel Resolution Selection . The selections are as follows: FUNCTION JUMPER SETTING (pin closed) JUMPER ILLUSTRATION 640 x 480 1-2 800 x 600 (10.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-15 2-12. CMOS FUNCTION SELECTION JP2 : CMOS Function Select ion The selections are as follows: FUNCTION JUMPER SETTING (pin closed.
Chapter 2 Hardware Config uration Page: 2-16 PPC-7508F USER ’ S MANUAL 2-13. RESET / NMI SELECTION JP4 : Reset/NMI/Cl ear Watchdog Selection The selections are as follows: FUNCTION JUMPER SETTING JUMPER ILLUSTRATION Reset (default) 3-4 NMI 5-6 User ma y select to use the Reset or NMI watchdog.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-17 2-14. CPU_VCCA VOLTAGE SELECTION JP5 : CPU_VCCA Voltage Selection The selections are as follows : SELECTION JUMPER SETTING (Pin Closed) JUMPER ILLUSTRATION VCCA 1.8V 1-2 VCCA 1.5V 1-3 *** Manufacturing Default: VCCA 1.
Chapter 2 Hardware Config uration Page: 2-18 PPC-7508F USER ’ S MANUAL 2-15. CPU FREQUENCY SELECTION JP3 : CPU Frequency Selection The selections are as follows : SELECTION JUMPER SETTING (Pin Closed) JUMPER ILLUSTRATION 100 MHz 1-2 *** Manufacturing Default: 100MHz.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-19 2-16. COM PORT CONNECTOR There are four COM ports enhanced in this board nam ely: COM1, COM2, COM3 and COM4. COM1, COM3 and COM4 are fixed for RS-232, while COM 2 is selectable for RS-232/422/ 485.
Chapter 2 Hardware Config uration Page: 2-20 PPC-7508F USER ’ S MANUAL COM3 : COM3 Connector The pin assignments are as follows : PIN ASSIGNMENT 1 DCD3 2 RX3 3 TX3 4 DTR3 5 GND 6 DSR3 7 RTS3 8 CTS3 .
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-21 2-17. VGA CONNECTOR VGA1 : VGA Connector The pin assignments are as follows: PIN ASSIGNMENT 1 RED 2 GREEN 3 BLUE 4 NC 5 GND 6 G.
Chapter 2 Hardware Config uration Page: 2-22 PPC-7508F USER ’ S MANUAL 2-18. LVDS CONNECTOR LVDS1 : LVDS Connector The pin assignments are as follows : PIN ASSIGNMENT PIN ASSIGNMENT 1 LVDS_VCC 2 GND.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-23 2-19. POWER CONNECTOR JATX1 : Power Connector The pin assignments are as follows : PIN ASSIGNMENT 1 5V 2 5V 3 GND 4 GND 5 12V 6.
Chapter 2 Hardware Config uration Page: 2-24 PPC-7508F USER ’ S MANUAL 2-20. HARD DISK DRIVE CONNECTOR IDE1 : Hard Disk Drive Connector The pin assignments are as follows: PIN ASSIGNMENT PIN ASSIGNM.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-25 2-21. PRINTER CONNECTOR JPRNT1 : Printer Connector As to link the Printer t o the card, you need a cable to connect both DB25 connector and parallel port.
Chapter 2 Hardware Config uration Page: 2-26 PPC-7508F USER ’ S MANUAL 2-22. LAN CONNECTOR LAN1: LAN Connector. The pin assignment is as follows : PIN ASSIGNMENT 1 MDI_0P 2 MDI_0N 3 MDI_1P 4 MDI_2P 5 MDI_2N 6 MDI_1N 7 MDI_3P 8 MDI_3N 2-23.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-27 2-24. KEYBOARD CONNECTOR KB1 : PC/AT Keyboard Connector The pin assignments are as follows : PIN ASSIGNMENT 1 KB DATA 2 NC 3 GND 5 5VSB 6 KB CLK 8 NC 2-25.
Chapter 2 Hardware Config uration Page: 2-28 PPC-7508F USER ’ S MANUAL 2-26. HDD LED CONNECTOR HDLED1 : HDD LED Connector The pin assignment is as follows : PIN ASSIGNMENT 1 HD_LED+ 2 HD_LED- 2-27. POWER BUTTON JPW1 : Power Button The pin assignments are as follows: PIN ASSIGNMENT 1 PWR_BN1 2 PWR_BN2 2-28.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-29 2-29. UNIVERSAL SERIAL BUS CONNECTOR USB1: Universal Serial Bus Connector. The pin assignments are as follows : PIN ASSIGNMENT 1 5V_USB0 2 USB0N 3 USB0P 4 GND USB2: Universal Serial Bus Connector.
Chapter 2 Hardware Config uration Page: 2-30 PPC-7508F USER ’ S MANUAL USB3 : Universal Serial Bus Connector. The pin assignments are as follows : PIN ASSIGNMENT 1 5V_USB2 3 USB2N 5 USB2P 7 GND 9 GND 2 5V_USB3 4 USB3N 6 USB3P 8 GND 10 GND USB4 : Universal Serial Bus Connector.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-31 2-30. MEMORY INSTALLATION This system is enhanced with 1 DDR DRAM banks, whic h support up to 1G. DRAM BANK CONFIGURATION DIMM 1 TOTAL MEMORY 128M 128MB 256M 256MB 512M 512MB 1G 1G 2-31.
Chapter 2 Hardware Config uration Page: 2-32 PPC-7508F USER ’ S MANUAL 2-32. POWER MODULE POWER1 : Power Module. The pin assignments are as follows : PIN ASSIGNMENT PIN ASSIGNMENT 1 +5V 2 5VSB 3 +5V.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-33 2-33. COMPACT FLASH CONNECTOR CF1 : Compact Flash Connector. The pin assignments are as follows : PIN ASSIGNMENT PIN ASSIGNMENT.
Chapter 2 Hardware Config uration Page: 2-34 PPC-7508F USER ’ S MANUAL 2-34. PCI-104 CONNECTOR PC104PLUS1 : PCI-104 Connector. The pin assignments are as follows : A B C D PIN ASSI GNMENT PIN ASSI G.
Chapter 2 Hardware Config uration PPC-7508F USER ’ S MANUAL Page: 2-35 2-35. CPU FAN CONNECTOR JCFAN1 : CPU Fan Connector PIN ASSIGNMENT 1 GROUND 2 FAN_VCC12 3 FAN_SPEED OUT 4 FAN_PWM 2-36. SYSTEM FAN CONNECTOR JSFAN1 : System FAN Connector PIN ASSIGNMENT 1 VCC12 2 GND 2-37.
Chapter 2 Hardware Config uration Page: 2-36 PPC-7508F USER ’ S MANUAL 2-38. RESET & SPEAKER CONNECTOR J1 : Reset and Speaker Connector PIN ASSIGNMENT 1 SPK_VCC 2 SPK 3 RST_SW 4 GND.
Page: 3-1 SOFTWARE UTILITIES This chapter comprises the detaile d inform ation of VGA driver, LAN driver, and sound driver, Intel Chip set Software Installation Utility, touch screen driver, USB 2.0 driver and Flash BIOS update. It also describes how to install the wat chdog timer configurati on.
Chapter 3 Software Configuration Page:3-2 PPC-7508F USER ′ S MANUAL 3-1. INTRODUCTION Enclosed with our PPC-7508F packag e is our driver utility, which may comes in a form of a CD ROM disc or floppy disket tes.
Chapter 3 Software Configuration PPC-7508F USER ′ S MANUAL Page:3-3 3-2. VGA DRIVER UTILITY The VGA interface embedded with our PPC-7508F can support a wide range of display . You can display CR T, LVDS simultaneously with the same mod e. 3-3-1. Installation of VGA Driver: To install the VGA Driver, simp ly follow the following steps: (1).
Chapter 3 Software Configuration Page:3-4 PPC-7508F USER ′ S MANUAL 3-3. FLASH BIOS UPDATE 3-3-1. Introduction Users of PPC-7508F can use the program “Awdflash.exe” cont ained in the Utility Disk for system BIOS update. 3-3-2. Installation of system BIOS 1.
Chapter 3 Software Configuration PPC-7508F USER ′ S MANUAL Page:3-5 After you have compl eted all the programm ing, the screen displays the table below: FLASH MEMORY WRITER V7.XX (C) Award Software 2001 All Ri ghts Reserved Flash Type –49LF004B File Name to Program: 7500xxxx.
Chapter 3 Software Configuration Page:3-6 PPC-7508F USER ′ S MANUAL 3-4. LAN DRIVER UTILITY 3-4-1. Introduction The PPC-7508F Panel PC is enhanced with LAN funct ion that can support various network adapters. Installat ion programs for LAN drivers are listed as follows: For more details on Installation pr ocedure, please refer to Readme.
Chapter 3 Software Configuration PPC-7508F USER ′ S MANUAL Page:3-7 3-5. SOUND DRIVER UTILITY 3-5-1. Introduction The Realtek ALC202A sound function enhanced in this sy stem is fully compatible with Windows NT 4.0, Windows 2000, Windows XP and Linux.
Chapter 3 Software Configuration Page:3-8 PPC-7508F USER ′ S MANUAL 3-6. INTEL® C HIPSET SOFTWARE INSTALLATION UTILITY 3-6-1. Introduction The Intel® Chipset Software Installatio n Utility installs to the target system the Windows* INF files that outline to the operating system how the chipset components will be confi gured.
Chapter 3 Software Configuration PPC-7508F USER ′ S MANUAL Page:3-9 3-7. USB2.0 SOFTWARE INSTALLATION UTILITY 3-7-1. Installation of Utility for Windows 98SE/ 2000/XP Intel USB 2.0 Enhanced Host Controller driver can only be used on Windows 98SE, Windows 2000 and Windows XP on Intel Desktop boards.
Chapter 3 Software Configuration Page:3-10 PPC-7508F USER ′ S MANUAL 3-9. WATCHDOG TIMER CONFIGURATION The Watch-dog Tim er has a program mable tim e-out ranging from 1 t o 255 minutes with one minut e resolution, or 1 to 255 sec onds wit h 1 second resolution.
Page: 4-1 AWARD BIOS SETUP This chapter shows how to set up the Award BIOS. Section includes: z Introduction z Entering Setup z The Standard CMOS Features z The Advanced BIOS Features z The Advanced C.
Chapter 4 Award BIOS Setup Page: 4-2 PPC-7508F USER ′ S MANUAL 4-1. INTRODUCTION This chapter will show you the function of th e BIOS in managing the features of your system . The PPC-7508F Panel PC is equipped with t he BIOS for system chipset from Award Software Inc.
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-3 4-2. ENTERING SETUP When the system is powered on , the BIOS will enter the Power-On Self Test (POST) routines and the following messag.
Chapter 4 Award BIOS Setup Page: 4-4 PPC-7508F USER ′ S MANUAL 4-3. THE STANDARD CMOS FEATURES Highlight t he 〝 STANDARD CMOS FEATURES 〞 and press the <ENTER> key and the screen will d isp.
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-5 IDE Primary Master / Slav e: IDE Secondary Master / Slav e: The BIOS can automatically detect th e specificati ons and optimal operating mode of al most all IDE hard drives.
Chapter 4 Award BIOS Setup Page: 4-6 PPC-7508F USER ′ S MANUAL LBA (Logical Block Addressing): During drive accesses, the IDE controller transforms the dat a address described by sector, head and cylinder number into a physical block address, significantly i mproving data transfer rate s.
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-7 HARD DISK ATTRIBUTES: Type Cylinders Heads V-P comp LZone Sect Capacity 1 306 4 128 305 17 10 2 615 4 300 615 17 20 3 615 6 300 615 17 .
Chapter 4 Award BIOS Setup Page: 4-8 PPC-7508F USER ′ S MANUAL 4-4. THE ADVANCED BIOS FEATURES Choose the 〝 ADVANCED BIOS FEATURES 〞 in the main menu, the screen shown as below.
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-9 QUICK POWER ON SELF-TEST: This item allows you to speed up Power On Self Test (POST) after power-up the computer. When enab led, the BIOS will shorten o r skip some check items during POST.
Chapter 4 Award BIOS Setup Page: 4-10 PPC-7508F USER ′ S MANUAL SECURITY OPTION: This category allows you to limit access to the system and Setup, or just to Setup. System The system will not boot and access to Setup will be denied if the correct password is not ente red at the prompt.
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-11 4-5. ADVANCED CHIPSET FEATURES Choose the 〝 ADVANCED CHIPSET FEATURES 〞 fr om th e ma in menu , the screen shown as below.
Chapter 4 Award BIOS Setup Page: 4-12 PPC-7508F USER ′ S MANUAL DRAM TIMEING SELECTABLE: The value in t his field depends on performance param eters of the installed mem ory chips (DRAM). Do not change the value from the factory setting unless you inst all new mem ory that has a different performance rati ng than the original DRAMs.
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-13 PCI SERR# NMI To Enable/Disable the PCI SERR# interrupt 4-6. INTEGRATED PERIPHERALS Choose 〝 INTEGRATED PERIPHERALS 〞 f ro m th e .
Chapter 4 Award BIOS Setup Page: 4-14 PPC-7508F USER ′ S MANUAL VIA ONCHIP IDE DEVICE: The options for these item s are found in its sub me nu. By pressing the <ENTER> key, you are prom pt to .
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-15 select Auto to enable BIOS support. 4. IDE HDD Block Mode: Block mode is also called block transfer, multiple commands, or multiple sector read/write.
Chapter 4 Award BIOS Setup Page: 4-16 PPC-7508F USER ′ S MANUAL SUPER IO DEVICE: The options for these item s are found in its sub me nu. By pressing the <ENTER> key, you are prom pt to enter .
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-17 ONBOARD SERIAL PORT 3: ONBOARD SERIAL PORT 4: Select a logical COM port name and mat ching address for the third and forth serial ports. Select an address and corresponding interrupt for t hird and forth serial port.
Chapter 4 Award BIOS Setup Page: 4-18 PPC-7508F USER ′ S MANUAL ACPI FUNCTION: Users are allowed to enable or disable t he Advanced Configuration and Power Management (ACPI). POWER MANAGEMENT: This item allows you to select the Power Management mode.
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-19 4-8. PNP/PCI CONFIGURATION Choose 〝 PNP/PCI CONFIGURATION 〞 fro m the main men u, a di sp lay will be shown on screen as below: Ph.
Chapter 4 Award BIOS Setup Page: 4-20 PPC-7508F USER ′ S MANUAL absolutely nothing unl ess you are using a Plug and Play operating system such as Windows 95. By choosing “manual ”, you are allowed to configure the IRQ Resources and DMA Resources .
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-21 4-9. PC HEALTH STATUS Choose 〝 PC HEALTH STATUS 〞 from the main menu, a display will be shown on screen as below: Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Item Help Shutdown Temperature Current CPU Temperature +2.
Chapter 4 Award BIOS Setup Page: 4-22 PPC-7508F USER ′ S MANUAL 4-10. FREQUENCY CONTROL Choose 〝 FREQUENCY CONTROL 〞 fr om th e ma in menu , a di spl ay will be shown on screen as below: Phoenix.
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-23 4-11. LOAD FAIL-SAFE DEFAULTS By pressing the <ENTER> key on this item, y ou get a confirmation dial og box with a message si mi.
Chapter 4 Award BIOS Setup Page: 4-24 PPC-7508F USER ′ S MANUAL 4-13. PASSWORD SETTING User is allowed to set eit her supervisor or user password, or both of them.
Chapter 4 Award BIOS Setup PPC-7508F USER ′ S MANUAL Page: 4-25 4-14. SAVE & EXIT SETUP After you have completed adjusti ng all the settings as required, you m ust remember to save these setting into the CMOS RAM.
Chapter 4 Award BIOS Setup Page: 4-26 PPC-7508F USER ′ S MANUAL 4-15. EXIT WITHOUT SAVING If you wish to cancel any changes you have made, y ou may select the “EXIT WITHOUT SAVING” and the orig inal setting stored in the CMOS will be retained.
Page: A-1 SYSTEM ASSEMBLY This appendix contain exploded diagram of the system . Section includes: z Exploded Diagram for C F Card Hook z Exploded Diagram for Fanl ess Back Cover z Exploded Diagram fo.
Appendix A System Assembly Page: A-2 PPC-7508F USER ′ S MANUAL EXPLODED DIAGRAM FOR CF CARD HOOK.
Appendix A System Assembly PPC-7508F USER ′ S MANUAL Page: A-3 EXPLODED DIAGRAM FOR FANLESS BACK COVER.
Appendix A System Assembly Page: A-4 PPC-7508F USER ′ S MANUAL EXPLODED DIAGRAM FOR SYSTEM POWER ASSEMBLY.
Appendix A System Assembly PPC-7508F USER ′ S MANUAL Page: A-5 EXPLODED DIAGRAM FOR I/O PORT ASSEMBLY.
Appendix A System Assembly Page: A-6 PPC-7508F USER ′ S MANUAL EXPLODED DIAGRAM FOR MOTHERBOARD.
Appendix A System Assembly PPC-7508F USER ′ S MANUAL Page: A-7 EXPLODED DIAGRAM FOR LCD ASSEMBLY.
Appendix A System Assembly Page: A-8 PPC-7508F USER ′ S MANUAL EXPLODED DIAGRAM FOR SYSTEM CABLE.
Appendix A System Assembly PPC-7508F USER ′ S MANUAL Page: A-9 EXPLODED DIAGRAM FOR SYSTEM INVERTER BOARD.
Appendix A System Assembly Page: A-10 PPC-7508F USER ′ S MANUAL EXPLODED DIAGRAM FOR TOUCH PANEL.
Appendix A System Assembly PPC-7508F USER ′ S MANUAL Page: A-11 EXPLODED DIAGRAM FOR FRONT PANEL.
Appendix A System Assembly Page: A-12 PPC-7508F USER ′ S MANUAL EXPLODED DIAGRAM FOR SYSTEM I/O SIDE.
Appendix A System Assembly PPC-7508F USER ′ S MANUAL Page: A-13 EXPLODED DIAGRAM FOR HEATSINK.
Appendix A System Assembly Page: A-14 PPC-7508F USER ′ S MANUAL EXPLODED DIAGRAM FOR HARD DISK DRIVE.
Appendix A System Assembly PPC-7508F USER ′ S MANUAL Page: A-15 EXPLODED DIAGRAM FOR HARD DISK DRIVE HOLDER.
Appendix A System Assembly Page: A-16 PPC-7508F USER ′ S MANUAL EXPLODED DIAGRAM FOR POWER HOLDER.
Page: B-1 TECHNICAL SUMMARY This section introduce you the m aps concisely. Sections include: z Block Diagram z Interrupt Map z RTC (Standard) RAM Bank z Timer & DMA C hannels Map z I / O & Me.
Appendix B Technical Summary Page: B-2 PPC -7508F USER ′ S MANUAL BLOCK DIAGRAM.
Appendix B Technical Summary PPC-7508F USER ′ S MANUAL Page: B-3 INTERRUPT MAP IRQ ASSIGNMENT 0 System TIMER interrupt from TIMER-0 1 Keyboard output buffer full 2 Cascade for IRQ 8-15 3 Serial port.
Appendix B Technical Summary Page: B-4 PPC -7508F USER ′ S MANUAL RTC (STANDARD) RAM BANK CODE ASSIGNMENT 00h Seconds 01h Second alarm 02h Minutes 03h Minutes alarm 04h Hours 05h Hours alarm 06h Day.
Appendix B Technical Summary PPC-7508F USER ′ S MANUAL Page: B-5 TIMER & DMA CHANNELS MAP Timer Channel Map : Timer Channel Assignment 0 System timer interrupt 1 DRAM Refresh request 2 Speaker t.
Appendix B Technical Summary Page: B-6 PPC -7508F USER ′ S MANUAL I/O & MEMORY MAP Fixed I/O Ranges Decoded by ICH2 : I/O Address Read Target Write Target Internal Unit 00h-08h DMA Controller DM.
Appendix B Technical Summary PPC-7508F USER ′ S MANUAL Page: B-7 I/O Address Read Target Write Target Internal Unit 80h DMA Controller DMA controller & LPC/PCI DMA 81h-83h DMA Controller DMA Con.
Appendix B Technical Summary Page: B-8 PPC -7508F USER ′ S MANUAL Memory Decode Ranges Fr om Processor Perspective : Memory Range Target Dependency/Comments 0000 0000h-000D FFFFh 0010 0000-TOM (Top .